Contact Us

TEL : +86-512-88161587
E-mail: orando@kylinsz.com
Address: 10005 room, Zhongxiang Financial Building, Jiayuan Road, Xiangcheng District, Suzhou, China.

Home > Knowledge > Content
What should you watch out for when using hot runner temperature controller?
Nov 09, 2018

What should you watch out for when using a hot runner temperature controller?

 

Be sure to pay attention to the following points when using the hot runner temperature controller:

1. Check if the power supply is safely controlled.

2. Check if this manual matches the controller.

3. Check if the connector is safe and reliable.

4. Check if the heater is safe and reliable.

5, check that the main power is off

6, check whether the power supply is suitable for the work of the controller

7, determine the ground connection controller

8, open the main power switch

9, open each controller work switch

10. Set the control temperature, check if the controller reaches the set temperature, and it is stable.

Please keep in mind the above ten points, use the hot runner temperature controller correctly to avoid damage to the hot runner temperature control box or other losses due to operational errors.


Previous: High-quality hot runner systems are an essential factor in the injection molding

Next: The hot runner temperature controller based on the calculus intelligent principle