Contact Us
TEL : +86-512-88161587
E-mail: alisa@kylinsz.com
Address: 10005 room, Zhongxiang Financial Building, Jiayuan Road, Xiangcheng District, Suzhou, China.
Home > Knowledge > Content
Temperature control of Hot runner system
Sep 12, 2017

The temperature control of hot runner system is very important, especially the gate and nozzle parts of hot runner mold are extremely sensitive to the temperature change, even several degrees of temperature change may result in unqualified plastic products. It is equivalent to the central nervous system of the human brain, precise control of the temperature of the hot runner systems, so how does the hot runner system precisely control the temperature? Jeheng Hot Runner Engineer gives you a detailed explanation of the temperature control of the Heat runner system. Hot runner system must be a thermal equilibrium state, heat loss must be compensated by heating. Therefore, accurate temperature control is very important for a hot runner system which has good function and can be operated automatically. The current temperature controller mostly adopts PIDD structure, which can control the temperature change within 1 ℃. Hot runner nozzles are generally heated by external heating methods, with spiral tubular heaters outside the nozzle. Also has the choice internal heating way, uses the heating stick to insert inside the nozzle. The heating of the runner plate is usually tubular heating rod, and the upper and lower two surfaces of the inflow path plate are bent according to the shape of the runner plate. The position of Hot runner thermocouple is another key point of temperature control. There are two very critical places in the hot runner. One is the gate, where the temperature is important for the fluidity and constant pressure of the melt; the other is the biggest point of heat output, where the plastic is in danger of thermal decomposition. Therefore, thermocouples should be installed at the highest expected temperature, never position where heat loss occurs, such as the pressure ring, near the sealing ring, or heat flow

The lateral area of the Tao body. At present, the thermal equilibrium can be analyzed by computer simulation, which can be used to determine the high temperature point on the nozzle and shunt plate.


Previous: Rules of Mold manufacturers test mode

Next: Control principle of PID temperature Controller