Contact Us

TEL : +86-512-88161587
E-mail: orando@kylinsz.com
Address: 10005 room, Zhongxiang Financial Building, Jiayuan Road, Xiangcheng District, Suzhou, China.

CE Certification Hot Runner Temperature Controller For Plastic Injection Machines

High quality hot runner controller with CE certification from SUZHOU KYLIN ELECTRONIC TECHNOLOGY CO.,LTD which is reliable and professional supplier of hot runner controller parts.

KT-600D Detailed Introduction

1)Panel Instruction:

600D hot runner controller card

2)Main Picture:

KT-600D1-1

2)Main Pictures

KT-600D3-1

KT-600D5-1

KT-600D6-1

KT-600D12-1


3)Main Specifications:

-Indoor use

-Power input voltage: single phase 230V;

-Output type:PWM,SSR

-Thermocouple wire type:J or K

-Temperature unit:C or F (can choose)

-Temperature control range:50~550

-Temperature control type:FUZZY +PIDD artifical intelligence+ shift-phase control

-Temperature stability:+0.5%

-Temperature precision:0.1

-Temperature resolution:0.1

 

4) Main Functions:

-Protection function against short circuit/open circuit,alarm in case of thermocouple misconnection

-Automatic environment temperature compensation.

-Soft-start automatic setting temperature range.

-380V input protection avoids the damage to controller arising from wrong voltage input.

-Thermocouple protection function enables the controller to identify heating wire and thermocouple automatically to avoid the damage to thermocouple arising from wrong input of inductor.

-Automatic environment linear compensation ensure higher precision of temperature value.

-Output interruption check.

-Current monitoring

-Loop break detection

-Deviation Alarms

-BOOST Function

-Manual power output mode

-Software locking

--Display errors completely to help you find failure reasons easily.

NOTE:

KT-300S hot runner temperature controller are equipped with all international functions and suited with DME,Yudo and Husky brands.

 

5. Alarm Message

    TABLE OF DEFECTS

Fault

Display

Solutions

Thermocouple breakage

tC oPEn   

display tC alternately with oPEn

Test the thermocouple with ohmmeter

Thermocouple pinched

tC SHrt

display tC alternately with SHrt

Find where the thermocouple is pinched

Thermocpuple inverted

 tC rEu

   display tC alternately with rEu

Check the thermocouple

Thermocouple and heater swapped

            tC bAd

   display tC alternately with bAd

Check the thermocoule and heater

Scr breakage

Scr bAd

display scr alternately with bAd

Test the Scr with ohmmeter

The voltage is error

HIGH voL

display HIGH alternately with voL

Check the the input voltage in cabinet

Heater breakage

HEAt oPEn

 display HEAt alternately with oPEn

Test the heater with ohmmeter

Heater pinched

            out SHrt

 display out alternately with SHrt

Find where the heater is pinched

Fuse breakage

F1-2 brk

display F1or2 alternately with brk

Replace the fuse F1 or F2

 

6.Contact us

SUZHOU KYLIN ELECTRONIC TECHNOLOGY CO.,LTD.


Contact Person: Orando Lu

Mobile/WhatsApp/ Wechat :+86 18355553130

Website:www.astcontrols.com

Email:orando@kylinsz.com

 

 



Hot Tags: ce certification hot runner temperature controller for plastic injection machines, China, manufacturers, suppliers, buy, for sale
Inquiry