Contact Us

TEL : +86-512-88161587
E-mail: orando@kylinsz.com
Address: 10005 room, Zhongxiang Financial Building, Jiayuan Road, Xiangcheng District, Suzhou, China.

6 Points Hot Runner Temp Controller Made In China

6 Points Hot Runner Temp Controller Made In China

Suzhou Kylin supply quality 300S series hot runner temperature controller , the number of groups from 1 to 36 zones in stock, delivery time is within 7 days after receiving payment. Applicable to all hot runner molds, various plastic molds, etc. Its shape and installation method adopts...

Suzhou Kylin supply quality 300S series hot runner temperature controller , the number of groups from 1 to 36 zones in stock, delivery time is within 7 days after receiving payment.

Applicable to all hot runner molds, various plastic molds, etc. Its shape and installation method adopts international standard structure. The power wiring system and the load connection method are standard structures. Each control card controls the one circuit heater temperature. The temperature control card is convenient for plugging in and can be used interchangeably with other manufacturers' temperature control cards,such as DME,Husky ,Yudo hot runner controller,ect.

Power supply,you could choose according to your requirement.

hot runner controller power supply diagram.jpg

For example, Three-phase AC380V, L1, L2, L3 three three-wire three-wire power respectively, N-zero line, PE ground wire.

Service promise:2 year warranty.We own enginner,any question during use,you could contact us,then give your professional feedback

Parameter:

Temperature unitC or F can be choosed
Sensor typeJ or K type can be choosed
Sensor temperature range50-550℃
Temperature accuracy0.1℃
Temperature control type
FUZZY+PIDD artificial intelligence+shift-phase control
One card load
16A,100W-3600W
Various protection functionsYes,all equipped

Features

1) over-voltage and over-current protection, when the wrong access to 380 volt power supply,  immediately start the protection status, so as to achieve the wrong connection will not burn out the temperature control card effect, the correct connection automatically enters the working state;

2) thermocouple disconnection, short circuit, reverse alarm sound and fault code display

3) FUZYY + PID control algorithm, PID parameters can be automatically set online and manually,Standby  three operate ways;

4) heater disconnection alarm function, the thermostat has automatic identification heater burnout, disconnection function, and alarm code display

5) the output power display, when heating can automatically detect the output power (A);

6) there is a hot runner soft start heating method to achieve the dehumidification and preheating effect of the hot runner, so as to achieve the effect of prolonging the service life of the protection heat pipe, and the soft start heating power and the heating time can be set freely;

7) K type and J type thermocouple sensor signals can be set. The precise temperature non-linear processing and integrated cold junction compensation control mode are zero-crossing trigger mode and PWM pulse width adjustment output.

8) temperature upper limit alarm function, temperature lower limit alarm function, upper / lower limit temperature can be set;

9) In addition to automatic control, the system is also equipped with manual,Standby control mode for special conditions 

300S hot runner controller back.jpg

Hot Tags: 6 points hot runner temp controller made in china, China, manufacturers, suppliers, buy, for sale
Inquiry